Oven Repair
Ovens that will not heat, bake unevenly or run hot. We test igniters, elements, sensors and controls on every oven type.
See the repairA wall oven lives inside cabinetry, with a cooling fan, a stacked control and often a second oven or microwave above it. We repair these built-in units without damaging the cutout around them.

$235 to $445 typical for cooling fan motor
Wall oven repair focuses on the parts unique to a built-in: the cooling fan, door lock motor and switch, the shared control for double ovens, and the elements and sensor in each cavity. If the oven shows a lock error or the fan runs nonstop, turn the breaker off and call us. We test the unit and quote the repair before starting.
We repair Whirlpool, GE, Samsung, LG, KitchenAid, Bosch, Sub-Zero, Wolf, Thermador and the other names found in Valley kitchens and laundry rooms.
A wall oven has no open space behind it to shed heat. A cooling fan above the cavity pulls air across the electronics and pushes it out through the vent above the door. If that fan stops, the control board overheats and the oven shuts down or throws an error.
Double wall ovens and combination units share one control and one power feed for two cavities. A fault in the shared parts can take out both ovens at once, while a failed element or sensor affects only one. We start by sorting out which kind of fault you have.
Many wall oven repairs can be done from the front with the door off. Some, such as wiring and rear components, require sliding the oven out of its cutout on support boards. We plan that carefully, since these ovens are heavy and the cabinet face is easy to scratch.

We repair wall ovens from Wolf, Thermador, Viking, Monogram, GE Profile, KitchenAid, JennAir, Bosch, Miele, Dacor, Café, Whirlpool and Frigidaire. Our technician reads fault history first, since built-ins often log the exact component that failed.


Wall oven parts and labor cost more than a freestanding range because of the built-in design. Pulling the unit out of the cutout adds labor.
| Repair | Typical range | What moves the price |
|---|---|---|
| Cooling fan motor | $235 to $445 | Fan location and brand |
| Door lock motor and switch | $215 to $425 | Lock design and door removal |
| Hidden bake or convection element | $225 to $435 | Element style and cavity access |
| Temperature sensor per cavity | $165 to $315 | Sensor routing and brand |
| Control or relay board | $385 to $865 | Single or double and brand |
Your real price depends on the part and the diagnosis, and the price is agreed with you before work starts.
Every visit follows the same order, so you always know what comes next and what it costs.
Give us the brand, single or double, and any error code. We set an arrival window on that call.
Many built-in ovens store recent error codes, which point to the failing part.
We remove the door and panels as needed and test the fan, lock, elements and sensor.
If the oven must come out of the cutout, we explain how and give you the price first.
We run a bake, confirm the fan cools the controls and check the door lock cycles.

Hillside homes in Studio City, Sherman Oaks, Encino, Tarzana and Woodland Hills often have narrow galley kitchens where a wall oven saves floor space. Those kitchens leave little room to set a 150 pound double oven down if it needs to come out. We bring support boards and a second technician when the job calls for it.
Getting there has its own planning. Steep driveways and narrow canyon streets mean we may carry tools and parts a distance from where we can park. Tell us about the access when you call, including any gate code or street parking limits, and we will arrive ready.
In most cases, yes. A new wall oven must fit the existing cutout, and sizes vary between brands and generations. Fitting the opening can mean cabinet work, which quickly adds to the cost of a replacement.
Fans, locks, elements and sensors are clear repairs. A control board is still often worth replacing on a high-end unit. On an older budget wall oven with a failed board and worn door, we compare the numbers with you honestly.
Safe checks only. If anything smells hot, sparks or involves gas, stop and call.
Our Sun Valley office sends technicians across the Valley and the cities around it. These are the places we visit most for wall oven repair.
Wall oven doors lock during self-clean and stay locked until the cavity cools. If the door stays locked long after, the lock motor or switch has likely failed. Turn off the breaker for a minute to reset it. If it stays locked, we release it and replace the lock.
Wall ovens run a cooling fan after cooking to protect the electronics, often for 20 minutes or longer. If the fan never stops, a temperature sensor or the control board may be keeping it on. We test both during a wall oven repair visit.
Yes. Each cavity in a double wall oven has its own elements and sensor, so one oven can fail while the other works. We test the failed side and repair only what is needed. If the shared control is the problem, both ovens are affected.
Most wall oven repairs are done from the front with the door or panels removed. Some wiring and rear parts require sliding the oven out of its cutout. When that is needed, we use support boards and protect the cabinet face, and we explain it before starting.
Yes. We repair Wolf, Thermador, Viking, Monogram, Miele, Dacor, JennAir and other built-in wall ovens. Common repairs include cooling fans, door locks, convection fans, elements, sensors and control boards. We protect the surrounding cabinetry during the wall oven repair.
Mid-bake shutdowns on a wall oven often come from the control board overheating because the cooling fan has failed or the vent is blocked. A loose power connection can also cause it. We check the fan, the vent path and the wiring.
Ovens that will not heat, bake unevenly or run hot. We test igniters, elements, sensors and controls on every oven type.
See the repairOver-the-range, countertop and built-in microwave repair for dead units, sparking, no heat and failed exhaust fans across the Valley.
See the repairFreestanding and slide-in gas, electric and dual-fuel ranges with dead burners, clicking igniters or tipping risks. Repaired on site.
See the repairInduction, radiant, gas and downdraft cooktops built into counters and islands. We repair burners, zones, controls and glass from above.
See the repairKitchen appliance installation for ranges, wall ovens, cooktops, refrigerators, microwaves and dishwashers on your existing hookups.
See the repairCall now. We answer every hour of every day and will tell you what we will check first.